BEP Marinco Heavy Duty Battery Master Switch - 12/24V Remote Operated (On/Off) - Surface Mount - 500A Cont - 700A Int - 2500A Crank - 113671 (SUR 720-MDO)
BEP Marinco Heavy Duty Battery Master Switch - 12/24V Remote Operated (On/Off) - Surface Mount - 500A Cont - 700A Int - 2500A Crank - 113671 (SUR 720-MDO)
-
Online Price: $516.00 (including 10 % GST tax)
- OR -
Australia's Best Price on BEP Marinco Heavy Duty Battery Master Switch - Remote Operated (On/Off) - 113671 (SUR 720-MDO)
Surface Mount - 500A Cont - 700A Int - 2500A Crank
overview
BEP Marinco Heavy Duty Battery Master Switch - Remote Operated (On/Off) - 113671 (SUR 720-MDO)
Surface Mount - 500A Cont - 700A Int - 2500A Crank
Motor Operated - 500 Amps Continuous
The MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant savings in expense and weight of copper battery cable. They are ideal for remote isolation of bow and stern thrusters. The 720-MDO has been enhanced to offer easy standard installation, or advanced options capable of switching different voltage circuits from the main supply (for example: a 48 volt bow thruster with a 24 volt house supply). The optical sensor uses the same easy connection for standard installation and gives you the ability to control different voltage circuits such as 36 or 48 volts. It can be used to switch positive or negative lines and the main contacts can be isolated from the control circuit allowing operation via another battery source. This optical sensor also has low stand-by current draw (<5mA).
- Remote operation
- Battery switch can be mounted alongside battery, reducing cable lengths and cable sizes. (Large cost and weight saving in copper cables)
- Reduced installation labor due to shorter battery cable runs
- Manual override option to meet CE/ABYC requirements
- LED status identification for remote control switch
- Same capacities/specifications and mounting options as standard BEP battery switches
- Uses interchangeable labeling system (Item # 713 or 715)
Options:
- 113546 - Key Operated On/Off Switch - Suits 701-MD and 720-MDO Battery Switches
- Panel mounted, key operated remote switch to activate the remote operated battery switches.
Downloads:
specification
- Continuous rating: 500 Amps DC - minimum 2x95mm² (2x 3/0) cables
- Intermittent rating: 700 Amps DC - minimum 2x95mm² (2x 3/0) cables
- Cranking rating: 2500 Amps DC - minimum 2x95mm² (2x 3/0) cables
- Maximum Voltage: 32 Volts DC (for motor/PCB supply) 50 Volts DC (switch contacts – note motor/PCB supply requires 12/24 volts)
- Auto operating range: 8 to 32 Volts DC
- Operation: Manual On/Off, Auto On/Off
- Mounting: Recessed or surface
- Ignition protected Meets UL 1107 standards
- IP Rating IP65
- Stud Size: 2 x 12mm (1/2”) – See Installation section for torques
- Materials: Tinned copper conductors/studs, stainless steel nuts, high temperature fibre reinforced plastics
- Power draw: Switch in off positions: <=5mA@12V or 24V Switch in “Auto On” 9mA @12V, 13.5mA @24V