Muir Prices
AV
Lighting
B-TECH LITHIUM PACKAGES
Refrigeration
Rule Pumps
Hella Navigation Lights
Lonestar
Battery
ICOM
Smart TV
Pumps
Muir Winches
Hot Water Heaters
Plastimo Compass
BBQ_2
Isotemp Hot Water System
Solar
Battery Chargers
TV
Topargee
Electrical
Clarion
Jabsco Pumps
B-Tec Lithium
Bennett
BBQ
Majestic
Aus Wide Shipping

Victron BlueSolar MPPT 75/10 Solar Charge Controller - Solar Panel Regulator – Suits 12 or 24V Systems (SCC010010050R)

  • Victron
    • Victron BlueSolar MPPT 75/10 Solar Charge Controller - Solar Panel Regulator – Suits 12 or 24V Systems (SCC010010050R)

    Victron BlueSolar MPPT 75/10 Solar Charge Controller - Solar Panel Regulator – Suits 12 or 24V Systems (SCC010010050R)

    BlueSolar MPPT 75/10 Solar Charge Controller - Max 75 VOC - Max Charge Current 10 Amps / PV Input 145W@12V or 290W@24V
    • Online Price: $77.00 (including 10 % GST tax)


    - OR -

    Australia's best price on Victron BlueSolar MPPT 75/10 Solar Charge Controller - Solar Panel Regulator (SCC010010050R)

    Suits 12 or 24V Systems (Auto Select)

    Max Charge Current 10A | Nom PV Input 145W@12V or 290W@24V | Max PV Open Circuit Voltage 75V

    overview

    Victron BlueSolar MPPT 75/10 Solar Charge Controller - Solar Panel Regulator (SCC010010050R) 

    Suits 12 or 24V Systems (Auto Selects)

    Max Charge Current 10A | Nom PV Input 145W@12V or 290W@24V | Max PV Open Circuit Voltage 75V

    Ideal for use in Marine-Boats, Caravans, Motor homes and RV’s

    Ultra-fast Maximum Power Point Tracking (MPPT) - Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

    Load output - Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.

    Battery Life: intelligent battery management - When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.

    The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

    Bluetooth Connectivity - Modern Apple and Android smartphones, tablets, macbooks and other devices: With the addition of VE.Direct Bluetooth Smart Bongle and the MPPT app discovery sheet for screenshots.

    Features:

    • 12 / 24 Volt + load output
    • Bluetooth enabled (Bluetooth dongle needed)
    • Day/night timing and light dimming option
    • Ultra-fast Maximum Power Point Tracking (MPPT)
    • Battery Life: intelligent battery management
    • Load Output

    Options:

    • V.E.Direct Bluetooth Smart Dongle - Connect to smartphones, tablets, macbooks and other devices (see Victron Connect MPPT App Discovery Sheet below)
    • Victron MPPT Control – Remote Status and setup.
    • Victron Color Control GX - Remote Control Panel

    Downloads:

    specification