Muir Prices
Refrigeration
B-TECH LITHIUM PACKAGES
Hella Navigation Lights
Battery
Rule Pumps
Lonestar
ICOM
AV
Muir Winches
Smart TV
Hot Water Heaters
Plastimo Compass
Solar
Lighting
Pumps
Clarion
Jabsco Pumps
Topargee
TV
Battery Chargers
Electrical
Bennett
BBQ
B-Tec Lithium
Majestic
BBQ_2
Isotemp Hot Water System
Aus Wide Shipping

BEP Marinco DC Systems Monitor (Panel Mount) - Suits 8-32V - Incl Shunt - 80-600-0027-00 (113408)

BEP Marinco DC Systems Monitor (Panel Mount) - Suits 8-32V - Incl Shunt - 80-600-0027-00 (113408)

BEP DSCM Contour Panel Mount - Marinco Battery Gauge - Digital System Monitor also displays Fresh, Grey or Black Water Tank Levels
  • Online Price: $1,173.00 (including 10 % GST tax)


- OR -

Australia's Best Price on BEP Marinco DC Systems Monitor (Panel Mount) - Suits 8-32V - Incl Shunt - 113408 (SUR 80-600-0027-00)

Gauge - Monitor 12-24 Volt Batteries, Fresh-Grey or Black Water Tank Fluid Levels

2.8” Colour LCD Display / Battery Input Voltage 8-32VDC / Battery Charge/Discharge Amps for up to two banks / Battery Capacity remaining in A/h and % / Battery Condition / Fresh, Grey or Black Tank fluid level / Circuit status

Specifically designed for use in Marine-Boat-Motor-Yachts,  Set Up Caravan, Camper trailer, Motorhome or RV For Free Camping

overview

BEP Marinco DC Systems Monitor (Panel Mount) - Suits 8-32V - Incl Shunt - 113408 (SUR 80-600-0027-00)

2.8” Colour LCD Display / Battery Input Voltage 12-24VDC / Charge/Discharge Amps for up to two banks

Capacity remaining in A/h and % / Battery Condition

Fresh, Grey Or Black Tank fluid level / Circuit status

The Contour Digital Monitor offers a comprehensive range of functions to allow full monitoring of your batteries and charging systems. Monitors voltage on up to 3 battery banks, Amps for charge and discharge and capacity remaining in amp hours /percentage utilising peukerts exponent (house bank only) with the added function of a bilge monitor allowing 24 hour monitoring of your bilge pump. This meter is an important addition to modern battery management systems. Selectable legends allow full information to be shown on the screen to avoid confusion, unlike other digital meters available, which only show confusing digits. LCD screen draws 70 percent less than equivalent LED screens.

Comes supplied with shunt, part No. LB-450-50. Installation kits are available in 5m and 10m lengths. part No. 600-DCM-5M and 600-DCM-10M

Display Type - Configure the DCSM to show the data in analogue, digital and graphic form.

Circuit Status - View the status of important circuits (on/off) In graphic and numeric  form

DC Power Meter:

  • Displays voltages of multiple battery banks (0-32VDC).
  • Displays charge and discharge (amps) of 1 x battery bank (*or  2 battery banks if extra shunt and cable are added).
  • Displays battery capacity in amp hours.
  • High/Low level alarms

Tank Level - View tank level information for multiple tanks in numeric and graphic forms. Resettable when leaving the boat.

Specifications:

  • 2.8" Colour QVGA LCD
  • Input voltage 8-32VDC
  • Dimensions:
    • Overall: Width 127mm x Height 115.5mm
    • Cut Out: Width 107mm x Height 95mm
    • Intrusion: 20mm
  • Backlit keypad

Monitors:

  • Charge/discharge amps for two* banks (*needs extra shunt - see below)
  • Capacity remaining in A/h and %
  • Battery condition
  • Tank fluid level
  • Circuit status

Includes:

DCSM Comes with Shunt to suit 1 x battery bank:

  • 1 x 450 Amp x 50mV Shunt (113457)

Options:

NB: *To add more battery banks one of each of the parts below are required for each battery bank (i.e. 1 x 113403 and 1 x 113457)

 

NB: To add tanks to monitor, add one programmable sender unit - TS1 Ultrasonic Tank Sender #113361 for each tank.

 

Downloads:

specification

Specifications:

  • 2.8" Colour QVGA LCD
  • Input voltage 8-32VDC
  • Dimensions:
    • Overall: Width 127mm x Height 115.5mm
    • Cut Out: Width 107mm x Height 95mm
    • Intrusion: 20mm
  • Back lit keypad

Monitors:

  • Charge/discharge amps for two banks
  • Capacity remaining in A/h and %
  • Battery condition
  • Tank fluid level
  • Circuit status

Features:

  • 8 Generic, user configurable inputs
  • Programmable high/low audio / visual alarms for volts, amps and tank levels
  • Backlit keypad and dimmable screen
  • Can be panel or surface mounted

NB: DCSM Comes with Shunt to suit 1 x battery bank:

  • 1 x 450 Amp x 50mV Shunt (113457)

NB: To add more battery banks one of each of the above parts are required for each battery bank (i.e. 1 x 113403 and 1 x 113457)

NB: To add tanks to monitor, add one programmable sender unit - TS1 Ultrasonic Tank Sender #113361 for each tank.