Muir Prices
Refrigeration
B-TECH LITHIUM PACKAGES
Hella Navigation Lights
Battery
Rule Pumps
Lonestar
ICOM
AV
Muir Winches
Smart TV
Hot Water Heaters
Plastimo Compass
Solar
Lighting
Pumps
Clarion
Jabsco Pumps
Topargee
TV
Battery Chargers
Electrical
Bennett
BBQ
B-Tec Lithium
Majestic
BBQ_2
Isotemp Hot Water System
Aus Wide Shipping

Enerdrive TIAV ePOWER Lithium B-TEC 200Ah Battery 12V BUNDLE - Incl. 40A DC2DC Charger, 40A AC Charger, 720W Solar Panels, ePRO Battery Monitor and 2000W Inverter - K-200-TIAV-2000X (K-200-18)

Enerdrive TIAV ePOWER Lithium B-TEC 200Ah Battery 12V BUNDLE - Incl. 40A DC2DC Charger, 40A AC Charger, 720W Solar Panels, ePRO Battery Monitor and 2000W Inverter - K-200-TIAV-2000X (K-200-18)

Trip In a Van 200A Lithium Battery Package 12V with ePRO Battery Monitor
  • $6,765.00
  • $5,599.00


- OR -

Enerdrive TIAV ePOWER Lithium B-TEC 200Ah Battery 12V - Incl. 40A DC2DC Charger, 40A AC Charger, 720W Solar Panels, ePRO Batt Monitor and 2000W Inverter - K-200-TIAV-2000X (K-200-18)

Complete System incl Battery Management System with Smartphone Monitor

Bundle contains the following items:

- ePOWER B-TEC G2 12v 200Ah Lithium Battery (Battery Dimensions: 505 L x 172 W x 265 H (mm) 25.0Kg)

- ePOWER 12v 40A Charger

- ePOWER 12v DC2DC40+ charger (with MPPT Solar Controller)

- ePRO PLUS Battery Monitor

- 4 x 180W Enerdrive Solar Panels

- 4 x Enerdrive 180W Mono Crystaline Solar Panels Dimensions: 1482 x 680 x 35 mm)

Up to 80% Depth of Discharge (DOD) - 200Ah Lithium = 320Ah AGM

Ideal for Marine, Boats, Yachts, Caravan, RV's and Motor Homes

overview

Enerdrive TRIP IN A VAN (TIAV) ePOWER Lithium B-TEC 200Ah Battery 12V BUNDLE - K-200-TIAV-2000X (K-200-18)

Incl. 40A DC2DC Charger, 40A AC Charger, 720W Solar Panels, ePRO Batt Monitor and 2000W Inverter

Complete System incl Battery Management System with Smartphone Monitor

Bundle contains the following items:

- ePOWER B-TEC G2 12v 200Ah Lithium Battery (Battery Dimensions: 505 L x 172 W x 265 H (mm) 25.0Kg)

- ePOWER 12v 40A Charger

- ePOWER 12v DC2DC40+ charger (with MPPT Solar Controller)

- ePRO PLUS Battery Monitor

- 4 x 180W Enerdrive Solar Panels

- 4 x Enerdrive 180W Mono Crystaline Solar Panels Dimensions: 1482 x 680 x 35 mm)

Available in 12v 200Ah capacity, the Enerdrive B-TEC G2 lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

Smartphone Monitoring System

Bluetooth Monitoring from your Smartphone or Tablet

Suits IOS and Android

The Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Size & Weight Savings

Lithium v AGM Capacities;

  • 100Ah Lithium = 160Ah AGM
  • 125Ah Lithium = 200Ah AGM
  • 200Ah Lithium G2 = 320Ah AGM

(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).

The Enerdrive B-TEC G2 battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The Enerdrive B-TEC G2 battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

The New Generation 2 B-TEC

So, How does the New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery measure up against it original predecessor? Let’s have a look.

Dimension Original Generation 2
Length 485mm 505mm
Width 170mm 172.5mm
Height 245mm 265mm

The increase in height allows for full 360° connection of the battery cables the make installation easier and more flexible. Also included for free is a metal battery tray and hold down strap to complete the installation process.

The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.

The new G2 also includes a RS485 communications port located on the top of the battery. This port allows for integration onto other CanBus systems for data monitoring and recording.

The New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery now comes with a 3 year full replacement warranty. Additionally, we have also included a further 2 year Pro-Rata warranty to giving you peace of mind knowing that Enerdrive have got you covered.

With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.

With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.

Please Note; The G2 battery is capable to be paralleled to a second G2 battery. For maximum performance and lifespan of your G2 battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.

If you are requiring a battery system larger than the Enerdrive B-TEC G2 battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.

240 VAC > 12/24VDC Li-Ion Capable Battery Chargers

These battery chargers have 3 outputs. Output #1 may be programmed to charge Lithium Batteries (LI-Ion) whilst #2 and #3 outputs can charge Lead Acid / AGM or Gel Batteries.

Li-Ion Capable DC to DC and Solar Battery Chargers

Warranty:

  • 2 years for; commerical & industrial applications in cycling and non-cycling applications
  • 3 years for; pleasure marine and automotive applications in cycling and non-cycling applications.
  • Enerdrive does not warrant the battery for use in any residential system sold with the intent or purpose of a “Tariff Adjustment Program” of any type.
  • Do not use a lead-acid charger if you want the best out of your battery. These chargers can damage the battery if left connected and will void your warranty
  • DO NOT use a charger with a “Pulse Stage” or “Equalisation Mode”. This will damage the battery and void warranty
  • This battery is not designed for, nor should it be fitted into an engine bay or other area subject to high heat. Damage WILL occur and not be covered by Enerdrive Warranty.
  • DO NOT use a charger with a “Pulse Stage” or “Equalisation Mode”. This will damage the battery and void warranty

specification

ePOWER DC2DC CHARGER Sprecifications

Output Rating

Output Voltage 12V Nominal (8.0V min)
Output Current (Maximum) 40A ~ 50A
Output Power 775W

Charger DC Output (CH1):

Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
Charger Voltage Range 13.8V – 15.5V
Float Voltage Range 13.0V – 13.8V
Charger Current (User Selectable) 5/10/15/20/25/30/35/40/45/50A (default 40A)
Equalize Voltage (Flooded Battery) 15.5V
Equalize Charging Current 10% of Bulk Current Setting
Charging Control 2 stage / 3 stage selectable (Default 3 stage)
DC Output Bank Single
Current draw from CH1 when in use = < 50mA
Battery Temperature Setting Low/ Normal/ High (Battery Temperature Sensor Standard)
Efficiency 95%

INPUT Rating (CH2 – MPPT Solar)

Input Voltage 14.5 – 45VOC
Maximum Input ≤ 23V input, 500W (600W allowable) ≥37.5V-45V input, 750W (800W allowable)

INPUT Rating (CH3 – Start/Alternator)

Input Voltage 10.5 – 16VDC / 21 – 32VDC

Note: Specifications subject to change without notice.

Related Products

Enerdrive ePOWER Battery Charger - 12 Volts 20 Amps - 3 Outputs - Lithium Ready - Incl Tep Sensor (EN31220)

Enerdrive ePOWER Battery Charger - 12 Volts 20 Amps - 3 Outputs - Lithium Ready - Incl Tep Sensor (EN31220)

Australia's Best Price on ePOWER Battery Charger - 12 Volts - 20 Amps - Charges multiple battery typ..

$385.00 $551.00

Enerdrive  ePOWER Battery Charger - 12 Volts 40 Amps - 3 Outputs - Lithium Ready - Incl. Temp Sensor  (EN31240)

Enerdrive ePOWER Battery Charger - 12 Volts 40 Amps - 3 Outputs - Lithium Ready - Incl. Temp Sensor (EN31240)

Australia's Best Price on ePOWER Battery Charger - 12 Volts - 40 Amps - Charges multiple battery typ..

$594.00 $714.00

Enerdrive ePOWER Battery Charger - 24 Volt - 30 Amps - 3 Battery Banks - Lithium Ready - Incl Temp Sensor (EN32430)

Enerdrive ePOWER Battery Charger - 24 Volt - 30 Amps - 3 Battery Banks - Lithium Ready - Incl Temp Sensor (EN32430)

Australia's Best Price on ePOWER Battery Charger - 24 Volts - 30 Amps - Charges multiple battery typ..

$836.00 $1,046.00

Enerdrive ePRO PLUS Battery Monitor - 12, 24 and 36 Volts DC - 50mm Display - Incl. 500A Shunt and 5m Wiring Cable (EN55050)

Enerdrive ePRO PLUS Battery Monitor - 12, 24 and 36 Volts DC - 50mm Display - Incl. 500A Shunt and 5m Wiring Cable (EN55050)

Australia's Best Price on Enerdrive ePRO PLUS Battery Monitor - 12, 24, 36 and 48VDC 50mm Display..

$449.00 $533.00

Enerdrive SIMARINE PICO4 - Digital Monitoring System with WiFi - 12/24 Volt Systems - SILVER Bezel Panel Mount (SI-PICO4)

Enerdrive SIMARINE PICO4 - Digital Monitoring System with WiFi - 12/24 Volt Systems - SILVER Bezel Panel Mount (SI-PICO4)

Australia's Best Price on Enerdrive SIMARINE PICO4 - Digital Monitoring System with WiFi - 12/24 Vol..

$495.00

Enerdrive SIMARINE PICO3 - Digital Monitoring System with WiFi - 12/24 Volt Systems - BLACK Bezel Panel Mount (SI-PICO3)

Enerdrive SIMARINE PICO3 - Digital Monitoring System with WiFi - 12/24 Volt Systems - BLACK Bezel Panel Mount (SI-PICO3)

Australia's Best Price on Enerdrive SIMARINE PICO3 - Digital Monitoring System with WiFi - 12/24 Vol..

$495.00

Enerdrive SIMARINE PICO2 - Digital Monitoring System with WiFi - 12/24 Volt Systems - SILVER Bezel Surface Mount (SI-PICO2)

Enerdrive SIMARINE PICO2 - Digital Monitoring System with WiFi - 12/24 Volt Systems - SILVER Bezel Surface Mount (SI-PICO2)

Australia's Best Price on Enerdrive SIMARINE PICO2 - Digital Monitoring System with WiFi - 12/24 Vol..

$495.00

Enerdrive SIMARINE PICO1 - Digital Monitoring System with WiFi - 12/24 Volt Systems - BLACK Bezel Surface Mount (SI-PICO1)

Enerdrive SIMARINE PICO1 - Digital Monitoring System with WiFi - 12/24 Volt Systems - BLACK Bezel Surface Mount (SI-PICO1)

Australia's Best Price on Enerdrive SIMARINE PICO1 - Digital Monitoring System with WiFi - 12/24 Vol..

$495.00

Enerdrive 3 Stud Busbar 600A M8 - 50 Volts DC - Suits Battery Monitor Shunt Expansion Systems (DCM-5073160)

Enerdrive 3 Stud Busbar 600A M8 - 50 Volts DC - Suits Battery Monitor Shunt Expansion Systems (DCM-5073160)

Australia's Best Price on Enerdrive 3 Stud Busbar – Suits Battery Monitor Shunt Expansion ..

$120.00

Enerdrive Link Bar 41mm 600A - M8 - M10, 50 Volts DC - Suits Battery Monitor Shunt Expansion Systems (DCM-5079062)

Enerdrive Link Bar 41mm 600A - M8 - M10, 50 Volts DC - Suits Battery Monitor Shunt Expansion Systems (DCM-5079062)

Australia's Best Price on Enerdrive Link Bar 41mm – Suits Battery Monitor Shunt Expansion ..

$33.00

Enerdrive Adaptor Plate 600A - Converts M8 - M10 to 4 x M4 - 50 Volts DC - Suits Battery Monitor Shunt Expansion Systems (DCM-5079020)

Enerdrive Adaptor Plate 600A - Converts M8 - M10 to 4 x M4 - 50 Volts DC - Suits Battery Monitor Shunt Expansion Systems (DCM-5079020)

Australia's Best Price on Enerdrive Adaptor Plate – Suits Battery Monitor Shunt Expansion&..

$27.00

Enerdrive Link Bar 51mm - 600A - M8 - M10, 50 Volts DC - Suits Battery Monitor Shunt Expansion Systems (DCM-5079072)

Enerdrive Link Bar 51mm - 600A - M8 - M10, 50 Volts DC - Suits Battery Monitor Shunt Expansion Systems (DCM-5079072)

Australia's Best Price on Enerdrive Link Bar 51mm – Suits Battery Monitor Shunt Expansion ..

$29.00

Enerdrive ePRO PLUS Bluetooth Dongle - Control, Readout and Configure ePRO Plus Battery Monitor (EN6092230)

Enerdrive ePRO PLUS Bluetooth Dongle - Control, Readout and Configure ePRO Plus Battery Monitor (EN6092230)

Australia's Best Price on Enerdrive ePRO PLUS Bluetooth Dongle - Control, Readout and Configure ePRO..

$209.00

Enerdrive 5 Stud Busbar 600A M8 - 50 Volts DC - Suits Battery Monitor Shunt Expansion Systems (DCM-5075160)

Enerdrive 5 Stud Busbar 600A M8 - 50 Volts DC - Suits Battery Monitor Shunt Expansion Systems (DCM-5075160)

Australia's Best Price on Enerdrive 5 Stud Busbar 600A M8 - 50 Volts DC - Suits Battery Monitor Shun..

$169.00

Enerdrive SIMARINE SC303 300A Shunt - Suits PICO LCD Battery Monitor (SI-SC303)

Enerdrive SIMARINE SC303 300A Shunt - Suits PICO LCD Battery Monitor (SI-SC303)

Australia's Best Price on Enerdrive SIMARINE SC303 300A Shunt - Suits PICO LCD Battery Monitor (SI-S..

$199.00

Enerdrive ePRO PLUS SHUNT and BLUETOOTH KIT  - Battery Monitor - 12, 24 and 36 Volts DC - Incl. 500A Shunt (EN6056030-4)

Enerdrive ePRO PLUS SHUNT and BLUETOOTH KIT - Battery Monitor - 12, 24 and 36 Volts DC - Incl. 500A Shunt (EN6056030-4)

Australia's Best Price on Enerdrive ePRO PLUS SHUNT and BLUETOOTH KIT  - Battery Monitor - 12, ..

$499.00 $582.00