overview

Isotherm CR100 Cruise Greyline Fridge/Freezer 381678 (1100BA1AA)

12 or 24 Volt - 95L Fridge with 5L Freezer - Changeable Left or Right Hand Door Hinge

Suitable for Boats-Caravans-Motorhomes and RVs

We ship Australia wide - Ask us for a quote!

Product Specifications:

• High quality fridge solution 
• Fan-cooled 12/24V Danfoss compressor 
• Custom door panels to complement any interior (grey door as standard) 
• Overall Volume 100 L
• 5L Freezer compartment
• One piece inner lining of food-quality, high density plastic with rounded corners for easy cleaning 
• Constructed of corrosion resistant materials 
• Innovative Isotherm door handle prevents door from being accidentally opened 
• Magnetic rubber seals keep moisture out and door firmly closed 
• Right hand or left hand side opening possible

Featuring air ducts and a fan ventilated compressor that permits circulation even in tight installations.

All models feature fan cooled compressors and some are available with the ASU (Automatic Start Up) power saving feature which senses when surplus power is available - during engine or genset operations etc - speeding up the compressor to rapidly freeze the holding plate. Then as available power decreases, the ASU reduces power consumption.

Reversible Door Hinge:
The doors on the refrigerators are as standard - mounted with the hinges to the right hand side. The door can be hinged to the left by means of changing position of the upper and lower hinge fittings. The door lock must also be moved to the other side. On the CR100 the upper hinge pin is mounted in the top ventilation grill and is moved to the other side. The lower hinge fitting and door support are moved and reverse mounted.

Options:

• 381907 - Flush, black side mounting frame to suit 381678 and 381680
• 382018 - Shelf to suit 381678 and 381680
• 381940 - Complete door handle

Download:

• Dimensional Drawings 3D
• Isotherm Cruise Marine Refrigerator Brochure
• Isotherm Cruise & Elegance Manual
• Isotherm CR100 Parts Diagram

specification

Ventilation:

It is very important that the compressor/condenser unit is well ventilated and that cold air can enter at the bottom, pass behind the fridge and warm air can leave at the top in the area where it is mounted. The natural flow of air from below and upwards behind the fridge can be increased by arranging  ventilation openings at the rear. Make sure there is a free area of 15 - 23 sq.in. below and behind the refrigerator to allow ventilation air to pass behind from below. (see diagram below).

Electrical Connections:

When connecting the refrigerator electrically, it is important that following points are considered:
Always use cables of suffi cient area. The area in the following table should be regarded as a minimum. * Always connect the refrigerator directly to the battery or to the battery main switch on the plus circuit. Do not connect it via the boats own control panel or other diversions as this can cause a voltage drop in the power supply. Use the included fuse holder with a 15A fuse. Use 7.5A fuse in a 24 volt system. The fuse shall be mounted on the plus cable.
*Connect the red cable to the positive (+) terminal and the black to the negative (-) terminal. Use tab type terminals for the connection to the electronic unit and other cable connectors of sufficient size for the cable size selected. * Do not connect the refrigerator direct to a battery charger. The battery charger must be connected to the battery.

Battery Voltage (Shut Down) Sensor:

To protect the batteries from becoming completely discharged, a battery voltage sensor switches off the compressor automatically at the following levels:

Wire Dimensions:

The correct wire gauge  and type must be used.