EcoFlow Wave 2
Zero Breeze
B-TECH LITHIUM PACKAGES
Hella Navigation Lights
AV
ICOM
Lonestar
Rule Pumps
Smart TV
Muir Winches
Plastimo Compass
Hot Water Heaters
Solar
Refrigeration
Lighting
Battery
Pumps
Clarion
Jabsco Pumps
Topargee
Battery Chargers
TV
Bennett
BBQ
Electrical
Majestic
BBQ_2
B-Tec Lithium
Isotemp Hot Water System
Aus Wide Shipping

Morningstar EcoPulse Solar Charge Controller 30A for 12 & 24V Systems - PWM - 4 Stage Charging - Low Battery Protection (SR-EC-30)

  • Morningstar
    • Morningstar EcoPulse Solar Charge Controller 30A for 12 & 24V Systems - PWM - 4 Stage Charging - Low Battery Protection (SR-EC-30)

    Morningstar EcoPulse Solar Charge Controller 30A for 12 & 24V Systems - PWM - 4 Stage Charging - Low Battery Protection (SR-EC-30)

    Morningstar EcoPulse Solar Charge Controller 30A for 12 & 24V Systems - Suits Wet, Sealed, GEL & AGM Batteries
    • Online Price: $223.00 (including 10 % GST tax)


    - OR -

    Australia's Best Price on Morningstar EcoPulse Solar Charge Controller 30A for 12 & 24V Systems

    PWM - Suits Wet, Sealed, GEL & AGM Batteries (SR-EC-30)

    153 x 105 x 55mm

    Max 60VOC / 30Amps

    overview

    Morningstar EcoPulse Solar Charge Controller 30A for 12 & 24V Systems - PWM (SR-EC-30)

      4 Stage Charging - Low Battery Protection

    Suits Wet, Sealed, GEL & AGM Batteries

    The NEW EcoPulse™ is now available and shipping from our warehouses. The EcoPulse is a pulse width modulation (PWM) solar charge controller within the Morningstar Essential Series™ which provides essential off-grid battery regulation functions. This controller is easy to use and was developed for residential and leisure consumer applications. Metered and non-metered versions of this product are available at 10, 20, and 30 amp charge ratings for 12 and 24 volt battery systems. This controller is not sold in the USA or Canada.

    Features:

    • High Reliability – conformally coated circuit board and corrosion resistant terminals.
    • Robust Thermal Design – extruded aluminum heatsink dissipates heat quickly without using cooling fans.
    • Durable Casing – high strength polycarbonate case.
    • LED Fault Indications – alert when short circuit, over current, high voltage, and other error conditions take place.
    • Automatic Solar Based Lighting Control – field adjustable dusk ‘til dawn setting.
    • Adjustable Charge Settings – seven presets and a custom setting can be set via DIP Switches or by the meter display buttons.
    • Adjustable Load Control – load control can be adjusted via meter display.
    • Optional Meter – multi-lingual interface with scroll buttons to adjust the settings and display metrics.

    Downloads:

    Options:

    • Remote Temperature Sensor (RTS)

    specification

    Normal Specification SR-EC-10 SR-EC-20 SR-EC-30
    Electrical
    Nominal Battery Voltage 12V or 24V auto-detect
    Battery Voltage Range 10-35V
    Voltage Accuracy <= 0.1% +/- 50mV
    Maximum Battery Current 10A, 20A or 30A
    Maximum PV open-circuit voltage 60V
    Load Current Rating 10A, 20A or 30A
    Self-Consumption <15mA; <20mA (meter)
    LED Indications (1) status, (3) Battery state of charge
    Transient Surge Protection 1500 Watts (solar, battery, load)
    Environmental
    Operating Temperature -40°C to + 45°C
    Storage Temperature -40°C to + 80°C
    Humidity 100% non-condensing
    Tropicalization conformal coating, marine-rated terminals
    Mechanical
    Dimensions (W x L x D)

    15.3 x 10.5 x 5.5 cm (6.0 x 4.1 x 2.2 in)

    Weight 0.4 kg / 1.0 lbs
    Wire Size Range

    Power Terminals: 2.5 – 16 mm2 / 14 – 6 AWG

    Battery/Temp. Sense: 0.25 – 1.0 mm2 / 24 – 16 AWG

    Enclosure IP20, Type 1
    Electronic Protections
    Solar Input overload, short-circuit, high voltage, reverse polarity, high temperature, nighttime reverse current
    Load Output overload, short-circuit, high temperature, reverse polarity
    Battery reverse polarity (no battery removal)
    Battery Charging
    4-Stage charging Bulk, Absorption, Float, Equalize
    Temperature Compensation Coefficient -30mV/°C/12volt
    Set-points Absorption, Float, Equalize, HVD
    Load & Lighting Control
    Low Voltage Disconnect, Low Voltage Reconnect Settings 11.4 V / 12.6 V or Custom (x2 for 24 volt systems)
    Lighting Settings Dusk to Dawn
    Certifications
    CE, TUV Listed IEC 62109
    Note: Specifications subject to change without notice.

    Circuit Protection (Circuit Breakers and Fuses)

    *Excerpt from Blue Sea Systems https://www.bluesea.com/support/articles/Circuit_Protection/98/DC_Circuit_Protection

    Choosing an Amperage Rating – Generally, circuit protection devices are installed to protect the wiring from overheating during overloads or faults. The simplest approach for selecting a circuit protection device rating is to choose an amperage rating that is equal to or less than the current rating, ampacity of the wire. If the wire ampacity is significantly greater than the load current, as might be with small loads or with wiring of increased size to reduce voltage drop, then a range of circuit protection values between the load requirement and the wire ampacity may be acceptable. Larger ampacity values reduce the probability of nuisance failures and reduce fuse heating; smaller ampacity values provide more conservative protection for the wiring.

    In some cases, a product manufacturer may recommend that a specific fuse or circuit breaker size should be used with the product. If that is the case, the wire to the product should be selected so that the wire ampacity exceeds the recommended rating, which will protect both the product and the wiring.

    We recommend Enerdrive waterproof surface mount re-settable circuit breakers for performance and value;