Isotherm Replacement DC Electronic Control Module for all Danfoss BD35 and BD50 Compressor's - 101N0212 - 381840 SEG00002DA - 101N0219R (Eva Comp-Mod-Seacop)
Isotherm Replacement DC Electronic Control Module for all Danfoss BD35 and BD50 Compressor's - 101N0212 - 381840 SEG00002DA - 101N0219R (Eva Comp-Mod-Seacop)
-
Online Price: $392.00 (including 10 % GST tax)
- OR -
Australia's Best Price on the Isotherm DC Electronic Module for all Danfoss BD35 and BD50 Compressor's
We deliver Australia wide - Ask us for a quote!!
overview
Isotherm Replacement DC Electronic Control Unit
* New Model 101N0219R Replacement For The 101N0212 & 101N0210 *
We deliver Australia wide - Ask us for a quote!!
12 - 24 Volt Electronic Module for all Danfoss BD35 and BD50 Compressors, used on Isotherm Refrigeration since 1998. Connects to the compressor with three pins.
Tech Tip: To test this module, put a jumper between the T (Thermostat) and C (Compressor) terminals. The compressor should start and run at low speed. If the compressor doesn't start, you may need to replace this module.
New Danfoss/ Seacop part number #101N0219 - Replacement for SECOP / Danfoss 101N0210 & 101N0212
Download:
Image of SECOP Replacement Module
specification
- Danfoss part number #101N0219
- Replaces part number # 101N0212
- Replaces part number # 101N0210
- Case size: 2 5/8" x 4 1/8" x 1 3/4
- The electronic unit is a dual voltage device. This means that the same unit can be used in both 12V and 24V power supply systems. Maximum voltage is 17V for a 12V system and 31.5V for a 24V power supply system. Max. ambient temperature is 55°C. The electronic unit has a built in thermal protection which is actuated and stops compressor operation if the electronic unit temperature gets too high.