overview

Vetus Flexible Waste Water Tank 55 Litre

Rectangle Shape - 780mmL x  680mmW (TANKV55)

Vetus flexible water tanks can be installed quickly and will assume the shape of their surroundings. Supplied with a 42mm hole cut ready for the supplied 16mm drawing nipple. The loose included 38mm filling nipple requires a hole to be user cut in the desired position. Additional nipples can be supplied as an option.

Features fully welded the seams, with additional welded reinforcing strip. This makes the VETUS flexible tank resistant against much higher pressures, especially if the contents are moving when the boat is rolling or pitching.

Features:
The fabric of VETUS flexible water tanks consists of three layers:

1. a wear resistant layer
2. a reinforcement layer
3. a odour tight layer

Waste Water System

Construction – see drawing for details:

• 1. Two right angle nipples Ø 38 mm (supplied with the tank)
• 2. Right angle breather nipple Ø 16 mm, already fitted.
• 3. Breather nipple Ø 16 mm.
• 4. Breather bend for anti-siphoning device. When discharge of the tank through a deck plate is required, a Ø 38 mm tank connector is available as an option.

Options:

• TANKV55 - 55L Rectangular Shape
• TANKV70 - 70L Rectangular Shape
• TANKV100 - 100L Rectangular Shape
• TANKV160 - 160L Rectangular Shape

Accessories:

• Angled Fittings - Angled synthetic fittings suitable for Flexible tanks (fresh water and waste) - Incl. Backing Plate
  • FT13B - Hose connection, Ø 13 mm, right angle, for flexible tanks
  • FT16B - Hose connection, Ø 16 mm, right angle, for flexible tanks
  • FT19B - Hose connection, Ø 19 mm, right angle, for flexible tanks
  • FT25B - Hose connection, Ø 25 mm, right angle, for flexible tanks
  • FT38B - Hose connection, Ø 38 mm, right angle, for flexible tanks

Downloads:

Installation instructions and Owners Manual

specification

All Tanks are approximately 300mm high when filled.