JL Audio MX 500/4 AMP - 4/3/2 Channel Amplifier - 4 x 90W - IPX6 (13848-001)
JL Audio MX 500/4 AMP - 4/3/2 Channel Amplifier - 4 x 90W - IPX6 (13848-001)
-
Online Price: $499.00 (including 10 % GST tax)
- OR -
Australia's Best Price on JL Audio MX 500/4 AMP - 4/3/2 Channel Amplifier - 4 x 90W - IPX6 (13848-001)
4-Channel Class D Full-Range Amplifier, 125 W x 4 @ 2ohm / 90 W x 4 @ 4ohm - 14.4V
237 W x 115 D x 45 H (mm)
overview
JL Audio MX 500/4 AMP - 4/3/2 Channel Amplifier - 4 x 90W - IPX6 (13848-001)
4-Channel Class D Full-Range Amplifier, 125 W x 4 @ 2ohm / 90 W x 4 @ 4ohm - 14.4V
Lets You Add More Speakers to Your System
MX Amplifiers
Compact, powerful and versatile, MX amplifiers are designed to deliver outstanding audio from the smallest of spaces. Engineered for versatile applications, MX amplifiers employ our ultra-efficient NexD™ switching technologies to generate loads of high-fidelity sound, without straining small charging systems. Housed in compact, cast-aluminum chassis, MX amps are water-resistant (IPX6 rated) and can go where conventional 12V amplifiers wouldn’t dare. Crossover filters and signal processing features are standard, allowing for easy set-up and system flexibility. Monoblock models include subwoofer level control capability using the optional M-RBC-1 (sold separately).
MX500/4
Engineered specifically for powersports applications, the 4-channel MX500/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX6 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles. Generating a solid 90W x 4 into 4 ohms (14.4V, 1% THD), the MX500/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 180W x 2 into 4 ohms. Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals. This amplifier features a black powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.
specification
Rated Continuous (RMS) Power @ 14.4 V
@ 4 Ω | 70 W RMS x 4 |
@ 2 Ω | 125 W RMS x 4 |
Bridged @ 4Ω | 250 W RMS x 2 |
Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ω | 55 W RMS x 4 |
@ 2 Ω | 90 W RMS x 4 |
Bridged @ 4Ω | 180 W RMS x 2 |
General Specifications
Frequency Response | 20 Hz - 20 kHz (+0, -1dB) |
S/N Ratio, referred to highest rated power | >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W | >70.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping Factor @ 4 Ω | >92 / 50 Hz |
Damping Factor @ 2 Ω | >43 / 50 Hz |
THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
Input Voltage Range @ RCA Inputs | Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) |
Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
Fuse Rating | 50 A (AFS, AGU or MaxiFuse™) |
Signal Processing
Filter Mode(s) | Low-Pass or High-Pass |
Filter Slope(s) | 12 dB/octave |
Filter Frequency Range | 35 Hz - 300 Hz |
Detented, Calibrated Filter Freq. Potentiometers | Yes |
Filter Defeat Function | Yes |
Remote Level Control | No |
Remote Level Modes | N/A |
Channel Input Mode Switch | Yes (2/3/4 ch.) |
Pass-Through Preamp Output | None |
Source Channel Selection for PreOuts | N/A |
Physical Specifications
Height (H) | 1.77 in / 45 mm |
Width (W) | 9.33 in / 237 mm |
Depth (D) | 4.50 in / 115 mm |